The ATSAMR34J18 is an ultra-low power microcontroller combined with a UHF transceiver communication interface. It uses the 32-bit ARM® Cortex®-M0+ processor and offers 256KB of Flash and 40KB of SRAM (8KB battery backed) in a compact 6 x 6 mm BGA package. With ultra-low power sleep currents as low as 790nA, the ATSAMR34J18 devices are ideal for battery powered remote sensor applications. The highly configurable peripherals include up to 5 SERCOMs (configurable as I2C/SPI /UART/LIN interfaces) with one in the low power domain, 8 12-bit ADC channels, 2 analog comparators and custom configurable logic modules. The transceiver supports LoRa, FSK, MSK and GSK modulation and delivers up to 20 dBm TX power with an RX sensitivity down to -148 dBm.Supported by certified SAM R34 Xplained Pro Evaluation Kit, Atmel Studio and a detailed chip-down design package, these devices highly simplify the development and accelerate the time to market for LoRa end-nodes. SAM R34/35 SiP devices come in six device variants with different memory/interface options. For more information on specific SAM R34/35 device variants, refer to the product variant below.ATSAMR34J18, ATSAMR34J17, ATSAMR34J16, ATSAMR35J18, ATSAMR35J17, ATSAMR35J16Reference links:To get started with software development, download and install Atmel Studio 7For software examples, update to ASF 3.44 and above in Atmel StudioTo access Chip-down design package, refer to the documents section on this pageEnable Long Range STAR on SAM R34 ICs and WLR089U0 ModuleMicrochip s complimentary and confidential Wireless Check online design review service is available for customers who have selected our products for their application design-in*.*The online design review service is subject to Microchip s Program Terms and Conditions and requires a myMicrochip account.