SEARCH
Quick RFQ
Home > Products > Microchip > ATSAME54P19A
Part Number: ATSAME54P19A
Manufacturer:
Microchip
Category:
High-Speed Networking and Video
Availability:
9483
Description:
ARM Cortex-M4F CPU running at up to 120 MHzFloating Point Unit (FPU)Embedded Trace Module (ETM) with instruction trace streamCore Sight Embedded Trace Buffer (ETB)Error Correction Code (ECC)Dual bank with Read-While-Write (RWW) supportEEPROM hardware emulationError Correction Code (ECC) RAM optionUp to 4 KB of Tightly Coupled Memory (TCM)Up to 8 KB additional SRAM with backup retention capabilityPower-on Reset (POR) and Brown-out detection (BOD)Internal and external clock optionsExternal Interrupt Controller (EIC)Two-pin Serial Wire Debug (SWD) programming, test, and debugging interfaceFive Low Power Modes (Idle, Standby, Hibernate, Backup, and Off )Sleep Walking peripherals.Battery backup supportEmbedded Buck/LDO regulator supporting on-the-fly selection.65µA/MHz active power consumption.Five confidential modes of operation (ECB, CBC, CFB, OFB, CTR)True Random Number Generator (TRNG)RSA, DSAElliptic Curves Cryptography (ECC) ECC GF(2n), ECC GF(p)Integrity Check Module (ICM) based on Secure Hash Algorithm (SHA1, SHA224, SHA256), DMA32-channel Direct Memory Access Controller (DMAC)Compatibility with SD and SDHC Memory Card Specification Version 3.01Compatibility with SDIO Specification Version 3.0Compliant with JDEC specification, MMC memory cards V4.51eXecute-In-Place (XIP) supportUp to 75 MHz SDR operation and DDR supportEmbedded host and device function10/100 Mbps in MII and RMII with dedicated DMAIEEE 1588 Precision Time Protocol (PTP) , Time Stamping Unit (TSU) supportIEEE802.3AZ/AF/PoE energy efficiency supportSupport for 802.1AS and 1588 precision clock synchronization protocolWake on LAN supportsupporting CAN2.0 A/B and CAN-FD 1.0USART with full-duplex and single-wire half-duplex configurationISO7816I2C up to 3.4MHzSPILIN master/slaveRS485SPI inter-byte spaceOne two-channel Inter-IC Sound Interface (I2S)Up to 14-bit parallel capture modeUp to 256 channel capacitive touch and proximity sensing32-channel Event System16-bit ,32-bit or 8-bit TC with two compare/capture channelsTwo 24-bit Timer/Counters for Control (TCC), with extended functionsThree 16-bit Timer/Counters for Control (TCC), with extended functionsUp to 5 wake-up pins with tamper detection and de-bouncing filterWatchdog Timer (WDT) with Window modeCRC-32 generatorPosition Decoder (PDEC)Frequency meter (FREQM)One Configurable Custom Logic (CCL)Differential and single-ended inputAutomatic offset and gain error compensationOversampling and decimation in hardware to support 13-, 14-, 15-, or 16-bit resolutionDual 12-bit, 1 MSPS Output Digital-to-Analog Converter (DAC)Two Analog Comparators (AC) with Window Compare functionOne temperature sensor99  programmable I/O pins1.71V – 3.6V128-pin TQFP,120-pin TFBGA
Requeset For ATSAME54P19A
Please submit the following information.
Name*
Tel
Company
Email*
Quantity and Demand*
ATSAME54P19A Datasheet PDF Specification
The SAM E54  high performance micro-controller series features  a 32-bit ARM® Cortex®-M4 processor with Floating Point Unit (FPU), running up to 120 MHz ,up to 1 MB Dual Panel Flash with ECC, and up to 256 KB of SRAM with ECC .It also adds  a 10/100 Ethernet MAC and 2 CAN-FD ports  targeted for industrial automation ,automotive  applications and general purpose applications requiring Wired connectivity. Series offers excellent features with class leading power performance and integrated hardware security. Key features ·         Quad Serial Peripheral Interface(QSPI) with  Execute in Place (XIP) Support. ·         Up to 2 Secure Digital Host Controller (SDHC) ·         10/100 Ethernet MAC with IEEE 1588 support. ·        Up to 2 CAN-FD Interface. ·         Inter-IC Sound(I2S)Controller for Audio ·         Peripheral Touch Controller (PTC) supporting up to 256 channels of capacitive touch . ·         Full speed USB with embedded Host/device. ·         Supports 5 Low power modes with class leading 65µA/MHz Active Power Performance. ·         Integrated security including Asymmetric and Symmetric  Crypto hardware acceleration ·         Serial communication (SERCOM) ports configurable as UART/USART, ISO 7816, SPI or I2C   Supported by MPLAB X IDE and MPLAB Harmony. Functional Safety This device supports the ISO 26262 (ASIL B) functional safety standard.    ·   The Functional Safety Manual, FMEDA and information on the Diagnostic Software are available under NDA through the request form on the 32-bit Microcontrollers Functional Safety  web page. ·   Learn more about 32-bit MCUs with Functional Safety capabilities including device hardware and certified software libraries.
+
Years Senior Experience
+
Million Offers
+
Staffs Worldwide
Traceable Vendors
+
Countries Customers

Most Popular Line Cards

Most Popular Part Numbers

Our line cards
Allegro MicroSystems Amphenol Analog Devices Bourns Cypress Semiconductor Diodes Incorporated Honeywell Infneon Tecnologies AG Intel ITT Inc KEMET Corporation KYOCERAAVX Components 3M Littelfuse Microchip Technology Micron Technology Microsemi Molex Murata Manufacturing Nexperia NVIDIA Corporation NXP Semiconductors onsemi Panasonic Raspbery Pi Foundation Renesas Electronics ROHM Semiconductor Silicon Labs ABB STMicroelectronics TDK TE Connectivityr Texas Instruments Vishay More >>
Links
Services Solutions Quality About
Contact Us
Tel: (86) 755 8395 9469
E-mail: info@eurotech-lcd.com
E-mail: info@eurotech-ic.com
Add: Building A, Jinfeng Zhihui Valley, No. 45, Yonghe Road, Bao'an District, Shenzhen
HK office: Unit 1003-1004,10/F, Block4, Nam Fung Industrial City, 18 Tin Hau Road,Tuen Mun, HONGKONG
Follow Us:
                    
EUROTECH All rights reserved.  Prohibit copying the content of this website!