SEARCH
Quick RFQ
Home > Products > Microchip > ATSAME53J18A
Part Number: ATSAME53J18A
Manufacturer:
Microchip
Category:
High-Speed Networking and Video
Availability:
3874
Description:
ARM Cortex-M4F CPU running at up to 120 MHzFloating Point Unit (FPU)Embedded Trace Module (ETM) with instruction trace streamCore Sight Embedded Trace Buffer (ETB)Error Correction Code (ECC)Dual bank with Read-While-Write (RWW) supportEEPROM hardware emulationError Correction Code (ECC) RAM optionUp to 4 KB of Tightly Coupled Memory (TCM)Up to 8 KB additional SRAM with backup retention capabilityPower-on Reset (POR) and Brown-out detection (BOD)Internal and external clock optionsExternal Interrupt Controller (EIC)Two-pin Serial Wire Debug (SWD) programming, test, and debugging interfaceFive Low Power Modes (Idle, Standby, Hibernate, Backup, and Off )Sleep Walking peripherals.Battery backup supportEmbedded Buck/LDO regulator supporting on-the-fly selection.65µA/MHz active power consumption.Five confidential modes of operation (ECB, CBC, CFB, OFB, CTR)True Random Number Generator (TRNG)RSA, DSAElliptic Curves Cryptography (ECC) ECC GF(2n), ECC GF(p)Integrity Check Module (ICM) based on Secure Hash Algorithm (SHA1, SHA224, SHA256), DMA32-channel Direct Memory Access Controller (DMAC)Compatibility with SD and SDHC Memory Card Specification Version 3.01Compatibility with SDIO Specification Version 3.0Compliant with JDEC specification, MMC memory cards V4.51eXecute-In-Place (XIP) supportUp to 75 MHz SDR operation and DDR supportEmbedded host and device functionUSART with full-duplex and single-wire half-duplex configurationISO7816I2C up to 3.4MHzSPILIN master/slaveRS485SPI inter-byte spaceOne two-channel Inter-IC Sound Interface (I2S) Up to 14-bit parallel capture mode Up to 256 channel capacitive touch and proximity sensing10/100 Mbps in MII and RMII with dedicated DMAIEEE 1588 Precision Time Protocol (PTP) , Time Stamping Unit (TSU) supportIEEE802.3AZ/AF/PoE energy efficiency supportSupport for 802.1AS and 1588 precision clock synchronization protocolWake on LAN support32-channel Event System16-bit ,32-bit or 8-bit TC with two compare/capture channels Two 24-bit Timer/Counters for Control (TCC), with extended functions:Up to 5 wake-up pins with tamper detection and de-bouncing filterWatchdog Timer (WDT) with Window modeCRC-32 generatorPosition Decoder (PDEC)Frequency meter (FREQM)One Configurable Custom Logic (CCL)Differential and single-ended inputAutomatic offset and gain error compensationOversampling and decimation in hardware to support 13-, 14-, 15-, or 16-bit resolutionDual 12-bit, 1 MSPS Output Digital-to-Analog Converter (DAC) Two Analog Comparators (AC) with Window Compare functionOne temperature sensor51  programmable I/O pins1.71V – 3.6V64-pin QFN,TQFP
Requeset For ATSAME53J18A
Please submit the following information.
Name*
Tel
Company
Email*
Quantity and Demand*
ATSAME53J18A Datasheet PDF Specification
The SAM E53  high performance micro-controller series features  a 32-bit ARM® Cortex®-M4 processor with Floating Point Unit (FPU), running up to 120 MHz ,up to 1 MB Dual Panel Flash with ECC, and up to 256 KB of SRAM with ECC .It features a 10/100 Ethernet MAC and is targeted for industrial and general purpose applications requiring Wired connectivity. Series offers excellent features with class leading power performance ideal for multiple market segments. Key features ·         Quad Serial Peripheral Interface(QSPI) with  Execute in Place (XIP) Support. ·         Up to 2 Secure Digital Host Controller (SDHC) ·         10/100 Ethernet MAC with IEEE 1588 support. ·         Inter-IC Sound(I2S)Controller for Audio ·         Peripheral Touch Controller (PTC) supporting up to 256 channels of capacitive touch . ·         Full speed USB with embedded Host/device. ·         Supports 5 Low power modes with class leading 65µA/MHz Active Power Performance. ·         Integrated security including Asymmetric and Symmetric  Crypto hardware acceleration ·         Serial communication (SERCOM) ports configurable as UART/USART, ISO 7816, SPI or I2C  Supported by MPLAB X IDE and MPLAB Harmony. Functional Safety This device supports the ISO 26262 (ASIL B) functional safety standard.    ·   The Functional Safety Manual, FMEDA and information on the Diagnostic Software are available under NDA through the request form on the 32-bit Microcontrollers Functional Safety web page. ·   Learn more about 32-bit MCUs with Functional Safety capabilities including device hardware and certified software libraries.
+
Years Senior Experience
+
Million Offers
+
Staffs Worldwide
Traceable Vendors
+
Countries Customers

Most Popular Line Cards

Most Popular Part Numbers

Our line cards
Allegro MicroSystems Amphenol Analog Devices Bourns Cypress Semiconductor Diodes Incorporated Honeywell Infneon Tecnologies AG Intel ITT Inc KEMET Corporation KYOCERAAVX Components 3M Littelfuse Microchip Technology Micron Technology Microsemi Molex Murata Manufacturing Nexperia NVIDIA Corporation NXP Semiconductors onsemi Panasonic Raspbery Pi Foundation Renesas Electronics ROHM Semiconductor Silicon Labs ABB STMicroelectronics TDK TE Connectivityr Texas Instruments Vishay More >>
Links
Services Solutions Quality About
Contact Us
Tel: (86) 755 8395 9469
E-mail: info@eurotech-lcd.com
E-mail: info@eurotech-ic.com
Add: Building A, Jinfeng Zhihui Valley, No. 45, Yonghe Road, Bao'an District, Shenzhen
HK office: Unit 1003-1004,10/F, Block4, Nam Fung Industrial City, 18 Tin Hau Road,Tuen Mun, HONGKONG
Follow Us:
                    
EUROTECH All rights reserved.  Prohibit copying the content of this website!