The MIC33M650 is a high-efficiency, low-voltage input, 6A
peak current synchronous step-down Power Module. The Constant-ON-Time (COT)
control architecture with HyperLight Load™ provides very high efficiency at
light loads, while still having ultra-fast transient response.
The MIC33M650 output voltage is set by two VSEL (Voltage Selection) pins, up to nine different values. This method eliminates the need for an external feedback resistor divider and improves the output voltage setting accuracy.
The 2.4V to 5.5V input voltage
range, low shutdown and quiescent currents make the MIC33M650 ideal for
single-cell Li-Ion battery-powered applications. The 100% duty cycle capability
provides low dropout operation, extending operating range in portable systems.
The MIC33M650 pinout is
compatible with the MIC33M656 I2C-based programmable regulator version, such
that applications can be easily converted. An open-drain Power Good output is
provided to indicate when the output voltage is within 9% of regulation and
facilitates the interface with an MCU, or power sequencing. If set in shutdown
(EN=GND), the MIC33M650 typically draws 1.5 µA, while the output is discharged
through 10 ohm pull-down.
The MIC33M650 is available in a
thermally efficient, 53 Lead 6mm x 10mm x 3mm thin B1QFN package, with
an operating junction temperature range from –40°C to +125°C.