The MIC33M356 is a high-efficiency, low-voltage input, 3A Continuous current synchronous step-down Power Module. The Constant-ON-Time (COT)
control architecture with HyperLight Load™ provides very high efficiency at
light loads, while still having ultra-fast transient response.
The I2C interface allows programming the output voltage
between 0.6V and 1.28V, with 5 mV resolution (-HAYMP and -FAYMP) or between 0.6V and 3.84V, with 10
mV and 20 mV resolution (-SAYMP). Two different default voltage options (0.9V
and 1.0V) are provided so that the application can be started with a safe
voltage level and then moved to high performance modes under I2C
control.
An open-drain Power Good output facilitates output
voltage monitoring and sequencing. If set in shutdown (EN = GND), the MIC33M356 typically draws 1.5 µA, while the output is discharged through 10 ohm pull-down (if the output
discharge feature is enabled).
The MIC33M356 pinout is compatible with the MIC33M350, so
that applications can be easily converted.
The 2.4V to 5.5V input voltage range, low shutdown and
quiescent currents make the MIC33M356 ideal for single-cell Li-Ion
battery-powered applications. The 100% duty cycle capability provides low
dropout operation, extending operating range in portable systems.
The MIC33M356 is available in a thermally efficient, 24-Lead 3 mm x 4.5 mm x 1.8 mm QFN package, with an operating
junction temperature range from -40°C to +125°C